SHIMPO DT-501XA Panel Mount Digital Tachometers (Basic input)

DT-501XA ฟังก์ชั่นการวัด

Panel Mount Digital Tachometers

DT-501XA จุดเด่น

Panel Mount Digital Tachometers (Basic input)

The largest digit size in the industry (22mm high)

The smallest depth in the industry (92mm)

DT-501XA ช่วงการวัด

Operation mode

Tachometer /Flowmeter

Display 1: 0 to 999999 6 digits

Transit timecounter/Time span

Display 1: 0:00:00 to 9:59:59 (hour, minute, second, base 60 display) /0:00:00 to 0:59:59 (hour, minute, second, base 60 display)

Display 2: 0:00 to 999:99 (second: 1/100 sec, base 10 display)

With zero suppression function

Input range

Tachometer/Flowmeter/Transit timecounter  0.0067Hz to 100kHz
Time span  10ms to 3600s

Measurement accuracy

Tachometer/Flowmeter/Transit timecounter  ±0.008%±1digit

Time span  ±0.1%±1digit

DT-501XA Power Supply

AC85 to 264V (50/60Hz)

DT-501XA ขนาดสินค้า

W96×H48×D92mm (DIN)

Approx. 200g

DT-501XA ข้อมูลจำเพาะ

Decimal point position  10-1 to 10-5 (Tachometer mode /Flowmeter mode)

Number indicator  Red 7 segment LED, font height 22mm, 6 digits, (-) display available

LED lamp  8 (SIG ,LL ,L ,H ,HH ,MAX ,MIN ,TEA)

Operation key  5 (SET/SHIFT ,MEM/TEACH ,UP/PARA ,RIGHT/FUNC ,ENT/MODE)

Filter

Switches among 100kHz, 30kHz, 10kHz, and 0.02kHz using parameters.  Note that you can switch between only 10kHz and 0.02kHz in a magnetic sensor, and its contact is only 0.02kHz.

Display cycle

Tachometer/Flowmeter/Transit timecounter  0.2, 0.5, 1, 2, 5, 10, 15, 30, 60 sec (can be changed in the parameter settings)

Time span  Dependent on the input signal

Pre-scale function

Parameter setting system using the front panel keys.  The teaching (combination) of display values are also available.

Memory function

Can store the maximum/minimum measurement values in memory, and display in the indicator.  (Switches the display using the MEM key)

Comparator function

Can display the settings of the upper limit, lower limit, upper-upper limit, and lower-lower limit, as well as judgment results on the LED lamp. Can also perform the hysteresis setting of the upper and lower limit values.

Auto zero time

Tachometer/Flowmeter  0.1 to 150 seconds

Transit timecounter/Time span  0.1 to 3600 seconds

Pre-arithmetic function

Updates the displayed value according to the elapsed time after the pulse stops.

Teaching function

Performs scaling automatically by setting the display value with a certain signal input.  (only in the tachometer and flowmeter modes)

Insulation resistance  10MΩ or more (at DC500V Mega)

Voltage proof  AC1500V or more  1min

Operating temperature  0 to 45°C (No condensation)

Operating humidity  35 to 85%RH (No condensation) 

Operating atmosphere No corrosive gas 

Conforming standard RoHS 

Protection function Front panel: IP66 (or equivalent), Rear terminal block: IP20

                                                                                                                                                    Peripheral speed measurement of the roller

                                                                                                                                                                  Transit time display in the oven

                                                                                                                                                    Operating time display of the press machine