HIOKI PQ3100-92 POWER QUALITY ANALYZER KIT เครื่องวิเคราะห์ไฟฟ้า
PQ3100-92
฿0.00(ไม่รวมภาษี)
จำนวน
สินค้าใกล้หมดแล้ว
PQ3100-92 ชุด KIT เครื่องบันทึกและวิเคราะห์ Power Analyzer พร้อมกันในเครื่องเดียว ในชุดมาพร้อม AC CURRENT SENSOR (CT7136) x 4 CARRYING CASE (C1009) x 1, SD MEMORY CARD 2GB (Z4001) x 1 3-Phase 4-Wire Power Quality Analyzer, IEC61000-4-30 Class S หน้าจอ 6.5-inch TFT color LCD (640 × 480 dots) มาตรฐาน 1000VAC (CATIII), 600VAC (CAT IV) บันทึกข้อมูลด้วย SD Card ยี่ห้อHIOKI, Japan
Index
PQ3100-92 | ฟังก์ชั่นการวัด
วิเคราะห์ไฟฟ้า
PQ3100-92 | จุดเด่น
- Simultaneously measure all parameters at once
- Easy wiring and configuration. Reliable measurement
- High basic performance level
- Convenient functions
- Clamp sensors that are easy to use anywhere
- Rich lineup of interfaces
- PQ One: Analyze data and create reports on a PC with a dedicated application
PQ3100-92 | ช่วงการวัด
AC/DC
Yes
Fundamental frequency
DC/ 50 Hz/ 60 Hz
Measurement lines
- Single-phase 2-wire
- single-phase 3-wire
- three-phase 3-wire
- three-phase 4-wire + Ch. 4
Voltage ranges
1000.0 V rms or DC, Transient measurement 2.200 kV peak
Current ranges
- 50.000 mA AC to 5.0000 kA AC
- 10.000 A DC to 2.0000 kA DC
(depends on current sensor in use)
Power ranges
50.000 W to 6.0000 MW
(determined automatically based on current range in use)
Basic accuracy
Voltage: ±0.2% of nominal voltage
Current: ±0.1 % rdg. ±0.1 % f.s. + current sensor accuracy
Active power: DC ±0.5 % rdg. ±0.5 % f.s. + current sensor accuracy
AC ±0.2 % rdg. ±0.1 % f.s. + current sensor accuracy
Voltage input Number of channels
4 (U4: Not isolated)
Voltage input Maximum terminal-toground rated voltage
1000 V (measurement category III)
600 V (measurement category IV)
Current input Number of channels
4
Current input Power supply for sensors
Yes
Measurement parameters
Voltage
- 1/2 RMS value (half-wave offset wave calculation)
- RMS value
- waveform peak
- Voltage DC
- Unbalance factor (negative-phase, zero-phase)
- frequency (1 wave/ 200 ms/ 10 sec.)
Crest factor
Current
- Inrush current (half-wave)
- RMS value
- waveform peak
- Current DC
- Unbalance factor (negative-phase, zero-phase)
- K facto
1/2 RMS value (half-wave offset wave calculation), crest factor
Power
- Active power
- Reactive power
- Apparent power
- Power factor,
- Displacement power factor
- Active energy
- Reactive energy
Apparent energy, Electrical charges
Flicker
Pst, Plt, ΔV10 (3 channels simultaneously)
Harmonics
- 0th order (DC) to 50th order
- Voltage/ Current/ Power
- Phase angle (voltage/ current)
- Voltage/Current phase difference
- Total harmonic distortion ratio (voltage/ current)
Inter-harmonics
0.5 th order to 49.5 th order, voltage/ current.
High-order harmonics
n/a
PQ3100-92 | Power Supply
AC adapter Z1002 (100 V to 240 V AC, 50/60 Hz, rated current 1.7 A),
Battery pack Z1003 (Continuous use: 8 hr Charging time: Max. 5 hr 30 m with AC adapter)
PQ3100-92 | ขนาดสินค้า
300 x 211 x 68 mm / 2.5 kg
PQ3100-92 | อุปกรณ์ที่มาในชุด
Standard
- Instruction manual ×1
- Measurement guide ×1
- Voltage cord L1000-05 ×1 set
(Red/Yellow/Blue/Gray/Black, Alligator clip ×5, Spiral tube ×5) - Color clip (for identifying clamp sensor color) ×1 set
- Spiral tube ×5
- AC adapter Z1002 ×1
- Strap ×1
- USB cable (1 m 3.28 ft length) ×1
- Battery pack Z1003 ×1
- PQ ONE (software, CD)
Kit includes PQ3100-92
- AC CURRENT SENSOR (CT7136) x 4
- CARRYING CASE (C1009) x 1
- SD MEMORY CARD 2GB (Z4001) x 1
PQ3100-92 | ข้อมูลจำเพาะ
Time-series measuremen
Recording period
Max. 1 year
Recording interval time
200 ms/600 ms/150 cycles (with 50 Hz input)/1/2/5/10/15/30 sec. to 2 h
Event statistical processing
Displays the number of occurrences by event per day
Waveform acquisition:
Before event Max. 1 sec.
At event 200 ms
After event Max. 10 sec.
Measurable event parameters
Voltage Swell/ Dip/ Interruption/ Frequency fluctuations/ Inrush current/ THD
Transient voltage
200 kS/s, 2.2 kV
Setting aid Quick Set
Operating temperature and humidity -20 to 50°C / 80%RH
IEC 61000-4-30 standard compliance Class S
Protection Class IP54 (EN60529) with connection cable connected, but not including cable tip
Power supply
AC adapter Z1002 (100 V to 240 V AC, 50/60 Hz, rated current 1.7 A),
Battery pack Z1003 (Continuous use: 8 hr Charging time: Max. 5 hr 30 m with AC adapter)
Interfaces
- SD/SDHC memory card
- RS-232C (for communication/ LR8410 link (Ver. up)
- LAN (HTTP server/ FTP (Ver. up)/ Send e-mail (Ver. up)
- USB 2.0 (for communication)