LCR METER IM3536-01 เครื่องวัดแอลซีอาร์

IM3536-01 | ฟังก์ชั่นการวัด

Measurement modes: LCR (Measurement with single condition), Continuous testing (Continuous measurement under saved conditions)

Measurement parameters: Z, Y, θ, X, G, B, Q, Rdc (DC resistance), Rs (ESR), Rp, Ls, Lp, Cs, Cp, D (tanδ), σ, ε

IM3536-01 | จุดเด่น

DC, 4 Hz to 10 MHz measurement frequency (special order)

High-speed measurement of 1 ms (fastest time)

High-precision measurement of ±0.05% rdg. (representative value)

Guaranteed accuracy range from 1 mΩ, low-impedance measurement with unmatched repeatability

DC bias function: Measure under conditions simulating actual use or in accordance with industry standards

Exceptional specifications and cost-performance for a wide range of applications, from R&D to production lines

IM3536-01 | ช่วงการวัด

Measurement range: 100 mΩ to 100 MΩ, 10 ranges (All parameters are determined according to Z)

IM3536-01 | Power Supply

100 to 240 V AC, 50/60 Hz, 50 VA max.

IM3536-01 | ขนาดสินค้า

330 mm (12.99 in) W × 119 mm (4.69 in) H × 230 mm (9.06 in) D, 4.2 kg (148.1 oz)

IM3536-01 | อุปกรณ์ที่มาในชุด

Power cord ×1

Instruction manual ×1

LCR application disc (Communications user manual) ×1

IM3536-01 | อุปกรณ์เสริม

Probe and Test fixtures

SMD TEST FIXTURE 9699

4-TERMINAL PROBE 9140-10

SMD TEST FIXTURE 9677

CONTACT TIPS IM9902

TEST FIXTURE 9261-10

DC BIAS CURRENT UNIT 9269-10

DC BIAS VOLTAGE UNIT 9268-10

4-TERMINAL PROBE 9500-10

CONTACT TIPS IM9901

PINCHER PROBE L2001

4-TERMINAL PROBE L2000

SMD TEST FIXTURE 9263

TEST FIXTURE 9262

SMD TEST FIXTURE IM9100

SMD TEST FIXTURE IM9110

When using the 9268-10 or 9269-10, external constant-voltage and constant-current sources are required.

PC communication

RS-232C CABLE 9637

GP-IB CONNECTOR CABLE 9151-02

IM3536-01 | ข้อมูลจำเพาะ

Measurement modes: LCR (Measurement with single condition), Continuous testing (Continuous measurement under saved conditions)

Measurement parameters: Z, Y, θ, X, G, B, Q, Rdc (DC resistance), Rs (ESR), Rp, Ls, Lp, Cs, Cp, D (tanδ), σ, ε

Measurement range: 100 mΩ to 100 MΩ, 10 ranges (All parameters are determined according to Z)

Display range: Z: 0.00 m to 9.99999 GΩ, Y: 0.000 n to 9.99999 GS, θ: ± (0.000° to 180.000°), Q: ± (0.00 to 9999.99), Rdc: ± (0.00 m to 9.99999 GΩ), D: ± (0.00000 to 9.99999), Δ%: ± (0.000 % to 999.999 %), or other

Basic accuracy: Z ±0.05% rdg. θ: ±0.03° (representative value, Measurable range: 1 mΩ to 200 MΩ)

Measurement frequency:  4 Hz to 10 MHz (5 digits setting resolution, minimum resolution 10 mHz)

Measurement signal level:

[Normal mode: V mode/CV mode] 

4 Hz to 1.0000 MHz: 10 mV to 5 Vrms (maximum 50 mArms) 

1.0001 MHz to 8 MHz: 10 mV to 1 Vrms (maximum 10mArms)

[Low impedance high accuracy mode: V mode/CV mode] 

4 Hz to 1.0000 MHz: 10 mV to 1 Vrms (maximum 100 mArms)

[Normal mode: CC mode] 

4 Hz to 1.0000 MHz: 10 μA to 50 mArms (maximum 5 Vrms) 

1.0001 MHz to 8 MHz: 10 μA to 10 mArms (maximum 1 Vrms)

[Low impedance high accuracy mode: CC mode] 

4 Hz to 1.0000 MHz: 10 μA to 100 mArms (maximum 1 Vrms)

[DC resistance measurement] Measurement signal level: Fixed at 1 V

DC bias measurement: Generating range: DC voltage 0 V to 2.50 V (10 mV resolution) In low Z high accuracy mode: 0 V to 1 V (10 mV resolution)

Output impedance: Normal mode: 100 Ω, Low impedance high accuracy mode: 10 Ω

Display: 5.7-inch color TFT with touch panel

Functions: Comparator, BIN measurement (10 categories for 2 measurement parameters), Trigger function, Open/short compensation, Contact check, Panel loading/saving, Memory function

Interfaces: EXT. I/O( HANDLER) ,USB, USB flash drive, LAN, GP-IB, RS-232C, BCD