ช่วงการวัด: 30A / 300A / 3000A Output Sensitivity: 100 mV/A, 10 mV/A, 1 mV/A Output Voltage: 3 ACV Flexible probe length: 600mm โพรบวัด Current สำหรับ DW-6093SD, DW-6095SD
Index
CP-3000 | ฟังก์ชั่นการวัด
Flexible Current Probe (3000A)
CP-3000 | จุดเด่น
โพรบวัด Current สำหรับ DW-6093SD, DW-6095SD
Flexible probe length : 600 mm ( 23.6 inch ).
When change the new probe, the calibration procedures are not necessary to be executed.
Signal output use the banana plugs, durable and safety.
Power supply is from the meter (DW-6093, DW-6095 ),battery is not necessary.
CP-3000 | ช่วงการวัด
Measurement ranges
30 A/300 A/3000 A, 3 ranges,switch selectable
1st range value : 30 A
2nd range value : 300 A
3rd range value : 3000 A
Accuracy
± 1% of range value
* Accuracy is specified that the measured conductor's position is on the center of " Flexible current probe ".
* 50/60 Hz..
* 23 ± 5 ℃
Frequency range 45 to 400 Hz.
* Accuracy tested under 50/60 Hz.
CP-3000 | Power Supply
Power supply is from the meter (DW-6093, DW-6095 ), battery is not necessary.
* Power supply voltage from DW-6093, DW-6095 is DC 8V± 1V..
CP-3000 | ขนาดสินค้า
Main circuit unit : 105 x 56.5 x 33 mm. ( 4.1 x 2.2 x 1.3 inch ).
Flexible probe : 600 mm x 14.5 mm DIA.
23.6 inch x 0.57 inch DIA.
Cable length : 3.4 meters ( 11.2 feet ).
DC plug size : 5.5 mm x 2.5 mm DIA.
426 g ( 0.94 LB ).
CP-3000 | อุปกรณ์ที่มาในชุด
Operating manual .....................1 PC.
CP-3000 | ข้อมูลจำเพาะ
Measurement ranges
30 A/300 A/3000 A, 3 ranges,switch selectable
1st range value : 30 A
2nd range value : 300 A
3rd range value : 3000 A
Output sensitivity 100 mV/A, 10 mV/A, 1 mV/A,
Accuracy
± 1% of range value
* Accuracy is specified that the measured conductor's position is on the center of " Flexible current probe ".
* 50/60 Hz..
* 23 ± 5 ℃
Frequency range 45 to 400 Hz.
* Accuracy tested under 50/60 Hz.
Linearity ± 0.2 % of reading value from 10 %
to 100% of range value.
Phase error < ± 1.5° *50/60 Hz..
Conductor position sensitivity ± 2 % of range value.
* Recommend the measured conductor position should > 25 mm ( 1" ) away from the " Probe locker ".
External field influence increase ± 1.5 % of range value max..
* Recommend the distance between different " Flexibel current probe " should > 200 mm ( 8" ).
Minimum load 100 K ohm for specified accuracy.
Enclosure material UL 94-V0 rated.
Safety IEC 1010, Categories III 600V.
Power Supply Power supply is from the meter
(DW-6093, DW-6095 ), battery is not necessary.
* Power supply voltage from DW-6093, DW-6095 is DC 8V± 1V..
Operating Temperature 0℃ to 50℃ ( 32℉ to 122℉ ).
Operating Humidity Less than 80% RH.
FRONT PANEL DESCRIPTIONS
3-1 Flexible current probe
3-2 Probe locker
3-3 Main circuit unit
3-4 3000A/300A/30A range switch
3-5 Cable
3-6 DCV power plug
3-7 Signal output plug ( +, red )
3-8 Signal output plug ( -, black )
3-9 Power LED lamp