Responsive Image
CEDAR DIS-IPS5C เครื่องทดสอบแรงบิด-photo0CEDAR DIS-IPS5C เครื่องทดสอบแรงบิด-photo1CEDAR DIS-IPS5C เครื่องทดสอบแรงบิด-photo2CEDAR DIS-IPS5C เครื่องทดสอบแรงบิด-photo3CEDAR DIS-IPS5C เครื่องทดสอบแรงบิด-photo4
CEDAR DIS-IPS5C เครื่องทดสอบแรงบิด-small-photo0
CEDAR DIS-IPS5C เครื่องทดสอบแรงบิด-small-photo1
CEDAR DIS-IPS5C เครื่องทดสอบแรงบิด-small-photo2
CEDAR DIS-IPS5C เครื่องทดสอบแรงบิด-small-photo3
CEDAR DIS-IPS5C เครื่องทดสอบแรงบิด-small-photo4
CEDAR

CEDAR DIS-IPS5C เครื่องทดสอบแรงบิด

รหัสสินค้า

DIS-IPS5C

฿69,000.00(ไม่รวมภาษี)

ภาพรวม

เครื่องทดสอบแรงบิดสำหรับตรวจสอบ Bolting machine ช่วงการวัด 0.020 ถึง 5 N•m Data Memory 800, ค่าฟังก์ชั่น Yes-No Decision, Average Data Output Real Time ยี่ห้อ CEDAR, JAPAN

เพิ่มคำถาม

DIS-IPS5C | ฟังก์ชั่นการวัด

เครื่องทดสอบแรงบิด สำหรับตรวจสอบ Bolting machine

DIS-IPS5C | จุดเด่น

PP: Peak load value hold.

TR: Indication of real time torque value

PD: Holding Load Value at the moment to change from upward to downword

C: Load torque value is outputted every about1/ 180 second

หน้าจอ The 4 figures digital display of LCD

Cord length 1 เมตร

ปิดเครื่องอัตโนมัติเมื่อไม่ได้ใช้งาน 

Data memory counts 800 data

Auto-power-off After the neglect during 10 minutes


DIS-IPS5C | ช่วงการวัด

0.020 ถึง 5 N•m / Accuracy ±0.5% (or less 499±3digit)

DIS-IPS5C | Power Supply

แบตเตอรี่ Ni-Cd chargeable battery1.2V x 5 (ใช้งานต่อได้นานต่อเนื่อง 12 ชั่วโมง)

DIS-IPS5C | ขนาดสินค้า

ตัวเครื่อง 100 x 105 x 33 mm (375g)


CEDAR DIS-IPS5C เครื่องทดสอบแรงบิด


DIS-IPS5C | อุปกรณ์ที่มาในชุด

ตัวประแจ CEDAR DIS-IPS5C

Attachment Cube 20*20*20 ㎜ (M2.6/3/4/5/6 )

Exclusive case

Result of calibration

Certification on calibration

Traceability system figure

AC/DC adaptor

DIS-IPS5C | อุปกรณ์เสริม

OW Joint รุ่น OW-10 (1 Nm)

DIS-IPS5C | ข้อมูลจำเพาะ

Measurement range 0.20~20 N・m 

Accuracy ±0.5% (or less 499±3digit)

Display The 4 figures digital display of LCD

The measurement direction CW-CCW (right and left)

Mode Track , P-P(peak to peak) , P-D(Peak-Down) , C(Real-time Output)

clearance It is a display clearance in set-up time. (0.1 - 3.0 sec)

A success or failure judging function High and low value are measurement within the limits, and can be set up. Five-set preservation is possible

The Maximum, the minimum, and the average value Displays, memory and output the data number, the maximum, the minimum, and the average value of the measured value

Data memory counts 800 data

Auto-power-off After the neglect during 10 minutes

Data output ASCII format (baud rate 19200)

Power supply Ni-Cd chargeable battery 1.2V×5cells 700mAh

Charge time / use time Charge about 3 hour /, continuation about 12-hour use

indicator size/ weight 100(W)×105(D)×33(H) (It does not contain by the projection thing.) / 357g

ข้อมูลในหน้านี้ถูกต้องและเป็นประโยชน์หรือไม่?