Responsive Image
Atago RX-5000i (No.3276) Automatic Digital Refractometer | Touch screen
RX-5000i-0SE81T_.jpg
ATAGO

Atago RX-5000i (No.3276) Automatic Digital Refractometer | Touch screen

รหัสสินค้า

RX-5000i

ภาพรวม

No.3276 เครื่องวัดความเข้มข้นแบบพกพา (หน้าจอสัมผัส) แนะนำสำหรับอุตสาหกรรมอาหาร ห้องทดลอง หรือห้องปฏิบัติการ ช่วงการวัด : ■ Refractive index (nD) : 1.32420 to 1.58000 ■ Brix : 0.00 to 100.00% (5 to 75°C ATC) ยี่ห้อ Atago, Japan

เพิ่มคำถาม

RX-5000i ฟังก์ชั่นการวัด

เครื่องวัดความเข้มข้นแบบพกพา 

RX-5000i จุดเด่น

✔พิเศษตัวเครื่องมีฟังก์ชั่นการวัด Automatic Temperature Compensation (ATC) ชดเชยอุณหภูมิอัติโนมัติ
✔ฟังก์ชั่น Calibration with water แคลิเบรชั่น Zero กับน้ำเปล่า
✔ช่องต่อ USB flash drive
✔RS-232C Interface
✔User scales can be inputted
✔Can be connected to a printer
✔Refractive index scale
✔หน้าจอแสกงผล Digital display

RX-5000i ช่วงการวัด

■ Refractive index (nD) : 1.32420 to 1.58000
■ Brix : 0.00 to 100.00%  (5 to 75°C ATC)

RX-5000i Power Supply

AC100V to 240V, 50/60Hz

RX-5000i ขนาดสินค้า

370 × 260 × 140mm/ 6600g Main Unit only)

RX-5000i อุปกรณ์ที่มาในชุด

Main unit × 1
Instruction manual × 1

RX-5000i ข้อมูลจำเพาะ

No. 3276
Scale ■ Refractive index, Brix
Measurement wavelength 589nm (near D-line)
Measurement Range ■ Refractive index (nD) : 1.32420 to 1.58000
                                         ■ Brix : 0.00 to 100.00%
                                             (5 to 75°C ATC)
Resolution ■ Refractive index (nD) : 0.00001
                      ■ Brix : 0.01%
                      ■ Temperature: 0.01°C
Accuracy ■ Refractive index (nD) : ±0.00004
                   ■ Brix : ±0.03%
                     *When measuring a standard sucrose solution of up to 50% Brix or standard refractive index solution in MODE-1 at 20°C
Temperature compensation range ■ 5.00 to 75.00°C (No lower than 10°C below or higher than 55°C above the ambient temperaturee)
Power Supply AC100V to 240V, 50/60Hz
Mode MODE-1:
                         Displays the measurement value once the sample reaches the target temperature.
            MODE-2:
                       Measures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperature.
            MODE-3:
                       The thermo-module can be turn off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressed.
            MODE-S:
                        Displays the measurement value once a certain level of sample stability is achieved.
Output terminals ■ Printer (for ATAGO digital printers)
                                   ■ Computer -USB

ข้อมูลในหน้านี้ถูกต้องและเป็นประโยชน์หรือไม่?
;