Attonic AD-FG50 เครื่องทดสอบแรงดึง/แรงกดแบบดิจิตอล 50～500N

AD-FG-50 ฟังก์ชั่นการวัด

เครื่องทดสอบแรงดึง-แรงผลัก,Digital force gauge

AD-FG-50 จุดเด่น

Easiness to use, high performance, and the low price were achieved.
- As for the digital display, it is reversible.
・The digital display can be reversed up and down by the mode setting.
- The various kind of an external output is standard equipment.
・USB connection
・Printer output(the printer is exclusively for Digimatic miniprocessor from MITUTOYO(DP-1VA))
- The minimum display value is detailed.
・For instance, the minimum display value is 0.01N in 100N.
 It is 0.1N in 500N.

AD-FG-50 ช่วงการวัด

±50.0～±500.0Ｎ / ±5.00～±50.00kgf / ±11.0～±110.0lbf

Accuracy  ±0.2% FS

AD-FG-50 Power Supply

Rechargeable Ni-MH Battery 1.2v×4cells (1650mAh)

AD-FG-50 ขนาดสินค้า

About 187（208 with the shaft included）（L）×80（W）×42（H）

About 800g

AD-FG-50 อุปกรณ์ที่มาในชุด

S-1 (V type A)

S-2 (V type B)

S-3 (Cone type)

S-4 (Flat type)

S-5 (Hook type)

S-6 (Extension rod type)

S-7 (Double-hook type)

AC adaptor 1 piece (AC100V - 240V)
USB Cable 1 piece

AD-FG-50 ข้อมูลจำเพาะ

Display  4-digits LCD

Measuring direction Compression - Tension (+ for compression, and - for tension as standard.)

Measurement mode

PEAK  Holds the maximum load

TRACK  The display changes depending on the load change. Used when adjusting to 0, etc

Compression Peak/Tension Peak (P-P)  Holds the peak value of compression and tension

Measuring unit  Selectable 3 unit N/ kgf(gf)/ lbf

Charging time  About 3 hours

Usage time  About 12 hours continuously

Battery life  Charge 300 times or more (however, it depends on the usage conditions)

Auto power off  Power off after leaving for 10 min.(Measurement without any time limit is also available)

Data output  ASCII format (Baud rate䋺19200)

Dedicated charger  Input: AC100V - 240V  Output: DC9V